Leading 10 usual forklift crashes ， forklift procedure must focus on these issues ！.

Leading 10 usual forklift crashes ， forklift procedure must focus on these issues ！.

Blog Article

Don't undervalue the forklift at the workplace. If the operation is bad, there will be serious accidents in minutes, and there are many mishaps entailing forklifts.

Instance 1: The forklift freight obstructed the vehicle driver's sight, and the person in front might not be found, leading to a rolling mishap.
Situation 2: In order to preserve the equilibrium of the forklift when lifting heavy goods, the employees used their body weight as the weight, which practically caused casualties.
Instance 3: The size of the forklift cargo goes beyond the allowed size of the route and holds on the roadside rack, which virtually triggers an accident.
Situation 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift driver did not see the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift raises the workers unlawfully, the forklift chauffeur does not use the seat belt, the forklift lifter falls and the motorist is crushed when the forklift surrender.
Case 7: The forklift chauffeur did not wear a safety belt and dropped from the lorry when it surrendered and was squashed.
Forklift operation must take notice of these matters ：.

Start.
1. Prior to beginning, observe the surroundings, and after confirming that there are no obstacles that hinder the safety and security of driving, honk the horn first and then begin.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge have to be secure prior to starting.
3. When the forklift begins with a tons, the vehicle driver must first confirm that the lots is steady and trustworthy.
4. The start needs to be slow-moving and stable.

Driving.
1. When driving, the height between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the pole must be tilted backwards. .
2. Do not raise the fork too expensive when driving. When going into and leaving the work website or while driving, beware that there will certainly be no challenges in the sky. When the lots is taking a trip, the fork should not be increased too expensive, which will influence the stability of the forklift. .
3. After unloading, the fork must be lowered to the typical driving setting before driving. .
4. When turning, if there are pedestrians or vehicles close by, the driving signal needs to be issued first. High-speed doglegs are prohibited. High-speed sharp turns will cause the car to shed lateral security and tip over. .
5. When the forklift is downhill, it is purely forbidden to shut off the fire and slide, and it is prohibited to brake instantly while driving with lots unless there are unique scenarios.
6. When the forklift is running, it should obey the website traffic rules in the manufacturing facility and have to keep a certain security distance from the lorry in front. .
7. When the forklift is running, the load should remain in the most affordable setting that does not impede the driving, and the gantry should be effectively tilted back. The lots will not be elevated except when piling or filling. .
8. The height of the lots have to not block the vehicle driver's sight. In special conditions, when the product influences the forward vision, drive at a reduced speed when turning around.
9. It is forbidden to switch on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it should drive safely at a low speed when entering the production workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for employees to depend on the fork to hold products and play a balancing role. .
12. If troubles are discovered, they will be fixed and reported in a prompt way, and they will never ever operate with diseases or hide them.

filling and discharging.
1. When fork-loading items, the range between both forks must be changed as needed to make the tons of the two forks well balanced and not skewed, and one side of the item need to be against the shelf. .
2. It is forbidden to work with a solitary fork or use a fork top or draw. In special circumstances, safety and security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of filling and discharging items, the forklift needs to be braked with the brake. .
4. Stand-on Electric Pallet Stacker The rate of the vehicle must be slow and consistent. Be careful not to roll the wheels on the dunnage, so as not to Stand-on Electric Pallet Stacker extend the rolled objects and harm individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it should be kept in mind that the fork pointer ought to not touch various other goods or items. The lots ought to be maintained with minimal back tilt of the gantry to ensure that the lots does not slide in reverse. The pole can be tilted ahead a little when the load is reduced to allow for simple positioning of the load and extraction of the forks. .
6. It is restricted to fork items at high speed and hit difficult things with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so regarding prevent the collapse of the goods and injure individuals. .
8. Overloading is restricted, and it is forbidden to make use of forks to raise personnel to engage in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is not permitted to use the brake inertia to slip, put, round or roll objects. .
10. It is not enabled to utilize forks to choose, transform pallet discharge.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork frame.
2. Draw the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for unique circumstances, such as the driver does not leave the vehicle's line of sight and does not go beyond 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance ought to be checked, and fuel, lubing oil and air conditioning water must be added.
2. Check the safety efficiency of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage needs to additionally be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You need to check prior to leaving the car;.
2. When you run into somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be as well sharp to prevent the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and consistent, and no switching on the incline is enabled.
7. Do not drive across the slope. When the gradient is above 10%, the vehicle needs to be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into large or hefty goods and most likely to the driver's line of vision, they should take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not permitted to bring individuals to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Car parking is not permitted under the list below problems.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844